FD140i Breathing Circuit Setup Instructions

Customer Support on how to set up Breathing Circuit in different modes with the FD140i

10th June at 12:26pm

Training Guide Videos

CPAP Mode

Continuous Positive Airway Pressure (CPAP) therapy maintains a target positive airway pressure during inspiration and expiration in the spontaneous breathing patient.

Assemble the CPAP breathing circuit and connect to AquaVENT® FD140i as shown:

image of FD140i CPAP breathing circuit setup

CPAP Paed.

The CPAP Paediatric mode is, in principle, the same as adult CPAP but delivers gas flow within a suitable range for paediatric patients.

Assemble the CPAP breathing circuit and connect to AquaVENT®FD140i as shown:

image of FD140i CPAP paed set up

CPAP Helmet Mode

AquaVENT®FD140i supports non-invasive ventilation by means of a CPAP helmet.

Assemble the Helmet CPAP breathing circuit and connect to AquaVENT® FD140i as shown:

image of FD140i CPAP helmet set up

HFOT Mode

High Flow Oxygen Therapy is a form of respiratory support where high flow rates (20-70 L/min) of Oxygen/Air mixture is delivered to the patient.

Assemble the HFOT breathing circuit and connect to AquaVENT® FD140i as shown:

image of FD140i HFOT set up

POINT Mode

POINT® (Peri-Operative Insufflatory Nasal Therapy) delivers humidified high flow nasal therapy to support the patient during the peri-operative period.

Assemble the POINT® breathing circuit and connect to AquaVENT® FD140i as shown:

image of FD140i POINT set up

Bubble-PAP Mode

Bubble-PAP provides a safe, consistent and accurate method of delivering humidified respiratory support to spontaneously breathing patients from birth weight up to 10kg. The therapy prevents  airway closure and maintains functional residual capacity.

Assemble the Bubble-PAP breathing circuit and connect to AquaVENT® FD140i as shown:

image of FD140i bubble-PAP set up

Further Support on FD140i

FD140i Mode Setup FD140i Troubleshooting Back to FD140i